How to Replace The Screen on Raching MON Series Electric Humidors

If you purchased a Raching humidor, you're in good company! However, even the best of the best experience some issues so we're here to help. If your display screen gets damaged in shipment, becomes damaged, or stops responding it can be replaced without replacing the entire humidor. If your unit is still is under warranty, a new screen will likely be sent by Raching. If your unit is not under warranty, you will need to purchase a new screen from Raching. 

So, on this page we're going to walk you through how to replace a screen on the Raching MON Series.

Disclaimer: We are not Raching product support but we maintain close relationship with the company and we find it helpful to bridge the communication gap between Raching and US customers. 

If you need additional help or guidance the Raching product support team is available at the contact information below

• Email: support@raching.com 
• Send a message using WhatsApp: +86 189 2679 5162

 

Before You Begin Here's What You’ll Need

• Replacement Display Screen
• Phillips Head Screwdriver
• Thin box cutter blade (or something similar. you'll see in video below)
• Soft Cloth or Towel
• 10ish minutes

Important Safety Information

Before replacing the display screen:

• Turn off the humidor
• Unplug the power cord
• Never work on the unit while it is connected to power

How To Replace The Screen: Taking Down The Current Screen

 

Step 1: Power Off

• Power Off The Humidor
• Disconnect the power cord from the wall outlet.
• Allow the unit to remain unplugged for approximately 60 seconds.

Step 2: Remove The Existing Display Screen (Video Included)

• Locate the display panel on the top front of the humidor.
• Locate the rectangular covers to the left and right of the display screen. Remove those using your box cutter or thin blade (see video)

• Using a Phillips screwdriver or drill remove the mounting screws securing the display assembly.
• Carefully pull the display forward.
• Do not force the display from the cabinet.

 

Step 3: Disconnect The Wiring Harness 

• Behind the display you will find a wiring connector.
• Carefully disconnect the connector from the display board.
• Avoid pulling directly on the wires.

 

 

Step 4: Install The New Display Screen (Video Included)

• Connect the wiring harness to the replacement display.
• Ensure the connector is fully seated.
• Position the new display into the mounting opening.
• Reinstall the mounting screws. Do not overtighten
• Replace the rectangular covers next to the display screen

 

Step 5: Restore Power

• Plug the humidor back into the wall outlet.
• Turn the unit on.
• The display should illuminate and begin displaying temperature and humidity readings.

Step 6: Verify Proper Operation

• Screen powers on
• Temperature displays correctly
• Humidity displays correctly
• Fan operates normally
• Interior lighting functions properly

Troubleshooting

 

Screen Does Not Turn On

Check:

• Power outlet
• Power cord connection
• Wiring harness connection behind display
• Display connector fully seated

Screen Powers On But No Readings Appear

• Turn unit off
• Disconnect power
• Recheck display connector
• Restart unit

Hopefully this guide helped you easily replace your screen. Subscribe and follow us for more humidor education, special product releases, and more! If we haven't worked with you yet, new customers get 10% their first purchase. We would love the opportunity to work with you! Looking for a replace or upgrade? Check out our collection of Raching humidors today!

 

 

Know Who You're Shopping With