Xikar Cigar Accessories How-To: Setup, Maintenance & Troubleshooting

When it comes to cigar accessories, it's plain and simple, people trust Xikar. Their cigar lighters, cigar cutters, and ashtrays are renowned in the smoking world for being reliable, well-crafted, and thoughtfully designed.

However, even the best accessories require proper care. That's why it's essential to know how to set up, maintain, and troubleshoot your Xikar items so that everything functions properly.

It's important to mention that all Xikar products have a lifetime warranty. Registering your item is not required for warranty service. XIKAR reserves the right to repair, or replace at their discretion. Returned items may be replaced with a refurbished equivalent, depending on the age and condition of the return.

XIKAR lifetime warranty covers manufacturing defects, but does not cover wear and tear from normal use.  Items that have been tampered with or only contain physical damage are not covered under the Limited Lifetime Warranty and will be rejected upon receipt. Do not disassemble your accessory in attempt to repair it yourself, as this will also void the warranty coverage. 

 

Getting Started: How to Use Xikar Cigar Accessories: Cut, Light, and Enjoy Like a Pro

Whether you’re a seasoned cigar aficionado or just getting started, having the right tools makes all the difference. Xikar is one of the most trusted names in the cigar world, known for sleek design, precision engineering, and lifetime performance guarantees.

Xikar cigar accessories are designed to work right out of the box, but how you set them up is crucial for example, their cigar lighters. You can't just use any lighter fluid from the local store to fill Xikar lighters; you need premium butane. Xikar recommends using high-performance butane that has been refined multiple times. 

This keeps the cigar lighter from getting clogged and misfiring. This is one of the most crucial Xikar cigar lighter features, the ability to create constant, wind-resistant flames when matched with the correct fuel.

Cigar cutters are the same. The best thing about any Xikar cigar cutter is its precision blades. They come with a very sharp edge, as they are made of hardened stainless steel that keep their edge longer than those of cheaper alternatives. Setting up your cutter isn't so much about putting it together as it is about getting used to how it feels and cuts. The ergonomic design of Xikar makes sure that cuts are smooth and controlled from the outset.

In this guide, we’ll show you how to properly use your Xikar cigar accessories including the popular Xikar lighter, Xikar cutter, Xikar torch lighters, and more so you get the most out of every cigar experience.

 

 

How to Use a Xikar Cutter

Xikar cigar cutters are designed for precision and control. Whether you’re using a classic guillotine cigar cutter or a modern V-cut cigar cutter, here’s how to get a clean, consistent cut every time.

✅ Step-by-Step: How to Cut a Cigar with a Xikar Cutter

1. Choose your cutter
   
• Guillotine Cutter: For a straight, even cut (e.g. Xikar Xi1 or Xi3)
• V-Cutter: For a deeper draw and a concentrated smoke path (e.g. Xikar VX2)
  
2. Locate the shoulder of the cigar
   
• That’s where the cap begins to curve. Cutting below the shoulder can unravel your cigar.
  
3. Place the cigar in the cutter
   
• Position the blade just above the shoulder. Be sure the cigar is centered.
  
4. Cut with confidence
   
• Use a quick, firm motion to slice through. Xikar blades are razor-sharp and designed for smooth cuts.
  

 

 

How to Use a Xikar Lighter

A proper cigar lighter sets the tone for the entire smoking experience. Xikar torch lighters and Xikar butane lighters are built for clean, powerful flames that work indoor or outdoors.

✅ Step-by-Step: How to Light a Cigar with a Xikar Torch Lighter

1. Use Xikar High-Performance Butane
   
• Always refill with Xikar butane lighters to prevent clogging and maximize performance.
  
2. Purge the lighter before refilling
   
• Use a small tool to release excess air or old butane from the fuel chamber.
  
3. Refill your lighter
   
• Hold the lighter upside down and press the butane nozzle firmly into the refill port for about 5–10 seconds.
  
4. Allow time to warm up
   
• Let the lighter sit for 2–3 minutes after refilling to stabilize pressure.
  
5. Adjust the flame height
   
• Use the flame adjustment dial (usually located at the base).
  
6. Light your cigar properly
   
• Hold the flame just under the foot of the cigar (don’t touch the flame to the tobacco).
• Slowly rotate the cigar to toast it evenly, then draw gently as you finish lighting.
  

 

How to Use a Xikar Ashtray

It might seem simple, but a quality Xikar ashtray is more than just a bowl it’s an extension of your cigar ritual. Keep your setup clean and stylish while protecting your cigars.

✅ Tips for Using Your Xikar Ashtray

• Use the cigar rests to keep cigars elevated and prevent rolling.
• Empty ash frequently to avoid overflow and preserve aroma.
• Choose a heat-resistant material like ceramic or metal for indoor and outdoor use.
• Clean regularly with a damp cloth and avoid abrasive cleaners.

 

 

Xikar Accessory Maintenance Tips

Routine maintenance for longevity is highly recommended because Xikar accessories are like well-maintained cars: they perform better when properly cared for. That entails letting the old butane out of the lighters before refilling them. Air pockets that remain can hinder performance, weakening flames. After you fill it up, changing the height of the flame will help you get the most out of the lighter. Another straightforward approach to make sure your jets work is to keep them clean with compressed air.

You need to clean cutters after you use them, though. Over time, resin from cigar caps can accumulate and dull the edge. You may keep the blade surface clean with a soft cloth or an alcohol wipe. This process keeps the Xikar cutters features sharp, so every cut stays exact.

To keep your Xikar cigar accessories in top shape, follow these maintenance tips:

Lighters:

• Always use Xikar butane to avoid clogging
• Keep the jets clean with compressed air
• Purge regularly before refilling

Cutters:

• Wipe blades clean with a soft cloth
• Avoid moisture exposure
• Store in a protective case or drawer to prevent dulling

Ashtrays:

• Clean with warm soapy water if ceramic or metal
• Avoid harsh chemicals that could damage the finish

Troubleshooting Common Xikar Issues

Hiccups can still occur even when you take care of them.

Inconsistent Flames? The problem is either harmful butane or air that is stuck. Usually, bleeding the tank completely before refilling it resolves the issue.

Dirty jets? A brief blast of compressed air usually fixes them.

Resistance in the blades? Most of the time, this is caused by resin accumulation, not a dull blade. Cleaning makes everything move smoothly again.

If problem persist? The Xikar lighter and cigar cutter warranties kick in 

 

 

🎯 Final Thoughts: Xikar Tools Elevate the Ritual

Trust is what has made Xikar famous. Their accessories are built to last, and they come with the best warranties in the business for cigar lighters and cigar cutters. It's easy to see why they are still a popular choice for cigar accessories when you add in their careful design and attention to high-quality materials.

When you’re passionate about cigars, only the best tools will do. With Xikar cigar accessories, you’re getting more than function, you’re investing in craftsmanship, reliability, and performance that lasts a lifetime.

From the Xikar guillotine cutter to the precision of a Xikar torch lighter, each accessory is designed to enhance your cigar experience from the first cut to the final ash.

👉 Explore Xikar now at Trusted Home Goods and take your cigar ritual to the next level.

🛒 Shop Xikar Cigar Accessories at Trusted Home Goods

Ready to upgrade your cigar setup? We carry a full range of Xikar cigar accessories including:

✅ Cigar Cutters

✅ Butane Lighters

✅ Ashtrays